Experienced Seafood Processors needed for our shore-based production plants located in Dutch Harbor, Alaska For Westward Seafoods and The Northern Victor. You will need to apply and attend a Virtual Interview.
Work will begin the 1st week of June! Interviews going on now for direct hire & June start. Beat the summer heat, cool off and make money working in Alaska for Westward Seafoods.
WSI processes several species of seafood including Pollock, Crab, Pacific Cod, Halibut and Sablefish. Production employees process raw product that is delivered from fishing vessels to sell to customers. Processors can be assigned to various positions within the production department including, but not limited to: butchering, sorting, filleting, and case-up. Processors are also required to participate in plant clean-up, and other duties as assigned.
This position requires the candidate have the ability to perform the physical requirements including; standing in place for long periods of time; repetitive motions using hands, arms, legs, and back; regularly lift and move 50 lbs; frequent rotations and twisting at the waist; frequent climbing and descending of stairs; working long hours in cold/wet environments (12+ hours per day, 7 days a week); and prompt and regular attendance. Overtime is available.
WSI has a zero tolerance policy for drugs and alcohol. You will be charged $20 per day for room and board. (This Could Change before the start of the season) Will be deducted from your paycheck. All WSI employees are required to wear protective safety gear where required and are responsible for promoting and maintaining a safe working environment for self and others. Shifts will vary depending on fish, and processors must be prepared to work 7 days a week for up to 18 hours per day. There may also be periods of time when there are few or no hours of work.
Pay for 2025 B Season will be $17.00 an hour, and overtime is $25.50.
Room and Board: You will be charged $20 per day for room and board. (This Could Change before the start of the season) Will be deducted from your paycheck.
WSI will pay for your flight from Seattle, WA to Dutch Harbor, Alaska. Point of Hire is Seattle, WA.
Benefits: Transportation to/from Point of Hire 401(k) Medical upon eligibility $20/day for room and board (this includes 3 meals a day from our company cafeteria) Onsite Laundry Facilities
Qualifications: Must be at least 18 years of age Must pass a post-offer drug screen and physical Must be able to stand and work for long hours in an often wet and cold environment. Must be able to repeatedly lift up to 50 pounds. Must have a basic understanding of English, including the ability to follow written or oral instructions. Must be able to climb stairs, and stand and walk on uneven and slippery surfaces. Must be willing to work any shift, including nights. Processing employees must be able to walk quickly to designated areas in the event of an emergency, and must be able to follow emergency instructions. All WSI employees must be willing to work and live in a multicultural environment.
Please email Rhianna@JobSparx.com if you encounter any problems with the online application process.
Westward Seafoods is an equal-opportunity employer. We consider applicants for all positions without regard to race, religion, creed, national origin, age, disability, marital or veteran status, or any other basis prohibited by applicable law.

T.G Meat Center is seeking to hire multiple meat cutters. This job requires a person to work in a cold refrigerated warehouse space. These are full-time positions, and we are looking to hire meat cutters with at least 1-2 years experience. Candidates that have experience cutting meat with commercial electric bandsaw are preferred. Work hours are 7am to 4pm, with occasional Saturdays and Overtime. All applicants will be contacted.
Benefits: Full Medical Dental Vision 401K Vacation Time Sick Time Holiday Pay Short-Term/Long-Term Disability
Qualifications: MUST be 18 years or older Able to utilize knives, saws, grinders and other equipment to perform meat cutting and trimming. Demonstrate the ability to identify different meat cuts. Willing to work individually as well as in a team. Maintain a safe environment- Personal Safety and Food Safety. Positive Attitude—makes everyone’s day better, including yours! Willing to learn and follow our processes. Ability to communicate verbally Be able to lift up to 60lbs Be physically able to load & unload a dolly or pallett Manufacturing experience is helpful, but not necessary.
T.G Meat Center  is a second chance employer. EOE. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Daily Instruments is seeking an AutoCAD Drafter to join our rapidly growing design and production team. The Drafter will be responsible for coordinating onsite work with the sales support team, engineering team, designers, purchasing/requisitions and special project team personnel, as well as working alongside production management staff. The successful Drafter will ensure that projects are completed safely and accurately, and in a timely manner to meet customer and shipping goals.
Full-Time | On-Site In-Person | Monday–Friday, 8AM–5PM (flexible schedule to accommodate two production shifts)
Job Duties: Manage the project work plan process to ensure accurate and timely completion of production goals Perform Engineering calculations involved with design, drafting or product; and all engineering changes Coordinate with customer specification, needs to ensure all sales and resulting work orders are in compliance with those requirements Strict compliance and enforcement of all ISO, QA, contractual, and client requirements Read and understand technical drawings, schematics Create drawings for customers, Sales Department, Engineering or any other as required. Create, update and correct drawings for submission to customers. Create Vendor Data books for submission to customers. Maintain drawing number log, of drawings made for sales, purchasing, manufacturing, clients Coordinate work with and directly communicate with multiple disciplines including engineering, manufacturing, purchasing, welders, and other production staff Inside Sales and/or Engineering point of contact and interface with Sales Support, vendors, clients, customers, other company departments, production.
Benefits: 100% Company paid Employee Only HDHP Medical. 100% Company paid Life Insurance. 401K with Employer Match. Medical Plan options available (two medical plans, dependent/family coverage options) Health Savings Account with Employer contribution. Flexible Savings Account. Optional Benefits: Dental, Vision, Supplemental Life Insurance, Disability, Accident plans
Qualifications: Must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Must be fluent in English with ability to communicate highly technical terms/ideas; any other language skills are beneficial Drafting, Technical or Engineering background and/or education, required Computer Aided Drafting (CAD) competency (preferably AutoCAD). Ability to read and interpret Engineering drawings. Familiarity with machine shop, working in a manufacturing/fabrication environment Familiarity with Production Planning or Scheduling, preferred Excellent technical communication skills, verbal and written Understanding of ASME codes and NDT processes Understanding of GD&T and welding symbols Self-driven initiative to respond to fluid work environment and rapidly changing priorities Proficient computer skills, including Microsoft Office Enthusiastic team player, Creative thinker, focus on bottom-line results while managing for Total Quality Assurance Compliance
Physical Requirements: Physically able to walk and maneuver about as needed, on the shop floor, inventory stockroom, and or shipping loading dock. Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 50 pounds at a time.
Daily Instruments provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.   This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Pay starts at $18.00 an hour and goes up depending on experience.
Our ideal candidate should have previous experience as a mechanic/technician in the trailer industry. Carpentry, welding and mechanic skills are a plus. We are looking for a self-motivated person with strong work ethics. We are willing to train the right applicant.
Duties will include: Read and understand the jobs and work order per company standards Preventative maintenance and repair all systems on Semi-Trailers to meet the standards set forth by DOT Remove and replace brakes, brake drums, hubs, seals, bearings, races and associated parts Repair electrical and lighting systems Repair or replace chassis components such as springs, spring hangers, equalizers, complete slider assemblies, axles, and sub frames Repair mud flap brackets and dolly leg assembles Repair or replace flooring, rub rails, doors and door trim Repair roofs, panels, nose panels, lower and upper rails Conform to all safety and health standards Assist fellow mechanic technicians
Benefits: Paid time off Paid holidays 401 Medical, Dental, Vision Life Insurance Long and Short Term Disability
Requirements: 1 - 3 years of experience in trailer repair or equivalent experience with welding, carpentry, and mechanic skills Valid driver’s license with a safe driving record. Must furnish own basic hand tools. Ability to stand, walk, bend, crouch, stoop, reach, stretch, step, climb, and / or sit frequently and lift heavy (up to 60lb) throughout the duration of the day Ability to work independently with minimal supervision Attention to detail and highly organized

Responsibilities: Forklift Drivers at Pol-Tex are responsible for safe operation of sit-down propane forklifts for the purpose of handling, loading, and unloading product. Drivers at Pol-Tex regularly use RF scanners and inventory control systems to pull orders, keep production lines supplied, and re-stock inventory racks. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.
Pol-Tex offers competitive compensation packages including Medical/Dental, paid vacations, paid holidays and 401(K).
If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Qualifications: One year of recent experience operating forklifts. The ability and desire to work safely. The ability to work a night shift or a day shift. 4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Find that perfect career match and enjoy a refreshing change at Pol-Tex, a division of Poly-America, L.P. Our Baytown area location is expanding and provides a great opportunity to work for an industry leader with a history of steady and stable growth.

If you are looking for a dynamic career opportunity that offers growth and stability then this could be the position for you.
Pol-Tex offers competitive compensation packages including: Medical Dental Paid vacations Paid holidays 401(K)
Qualifications: The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. The desire to expand knowledge and grow with the company. The ability and desire to work safely. The ability to work a night shift or a day shift.  4 day on/4 day off rotation as assigned by management. Additional responsibilities and opportunities as they are assigned by management.

Pol-Tex International, a division of Poly-America, L.P., is currently seeking an Industrial Mechanic to join our maintenance team. Pol-Tex International’s mission is to be the safest and most efficient choice in the polyethylene recovery, recycling, and compounding industries.  Our fleet, facility, and equipment combined with our experienced and dedicated professional staff make Pol-Tex International the premier gathering and recycling center for the Gulf Coast Region. Pol-Tex International offers competitive compensation packages including Medical/Dental, paid vacations and holidays, and 401(K). Responsibilities Industrial Mechanics at Pol-Tex International are responsible for the maintenance, installation, troubleshooting, and modification of new and existing industrial converting equipment. This role will document, recommend, and execute maintenance procedures. The Mechanic will be working in a manufacturing maintenance team. At times they will complete the mechanical testing of electro-mechanical equipment. Tasks include replacing, inspecting and dismantling defective parts, and implementing upgrades and part changeovers. The role may involve additional responsibilities and opportunities as they become necessary and/or are assigned by management.
The ideal candidate will possess: Some experience performing troubleshooting functions in a manufacturing environment. A strong desire to be hands on with their work and to follow processes through. The aptitude and desire necessary to be a good student of Pol-Tex processes, equipment, and procedures. Problem solving skills including troubleshooting of mechanical equipment.

Encuentra la Carrera perfecta y disfruta un refrescante cambio en Pol-Tex, division de Poly-America, L.P. Nuestra localidad en el area de Baytown se esta expandiendo y provee una gran oportunidad para trabajar en una industria lider en estabilidad y crecimiento.
Los empleados de produccion en Pol-Tex son responsables por la operacion segura de montacargas de gas para el proposito de manejo de cargar y descargar producto. El puesto de trabajo puede implicar responsabilidades adicionales a medida que se necesiten y/o sean asignadas por el gerente.
Responsabilidades: Operadores de montacargas en Pol-Tex son responsables por la operacion segura de montacargas sentado de gas para el proposito de manejo carga y descarga de producto. Los operadores de montacargas en Pol-Tex regularmente usan escaners RF y sistemas de control de inventario para  sacar ordenes , mantener las lineas de produccion suministradas y re llenar los bastidores de almacenamiento. La posicion puede incluir responsabilidades y oportunidades adicionales segun sean necesarias y/o asignadas por el gerente.
Calificaciones: Seis meses a un ano de experiencia reciente operando montacargas La habilidad y el deseo de trabajar de una manera segura La disponibilidad de trabajar un turno de dia o de noche. 4 dias de trabajo/ 4 dias de descanso, dias rotativos segun sean assignados. Responsabilidades adicionales y oportunidades segun sean asignadas por el gerente.

W.M. Dewey & Son, Inc. is a family-owned business that has been providing services to the oil and gas industry since 1895. We specialize in being a full-service provider of pipe transportation, pipe storage and pipe logistics services. W.M. Dewey has an immediate opening for dependable safety oriented Facilities Maintenance Helper. Who is willing to grow in knowledge and increase their responsibilities in the workplace.
Job Duties: Landscaping duties around yard (operation of lawn equipment) Perform general maintenance around the yard, shop, and office (general electrical and plumbing) Maintain shop floors for cleanliness in and around machines, tools, and equipment Operate a forklift (Training Provided) Assist Diesel Mechanics in the shop as needed (Working on tires, Large Trucks, Forklifts, Small Lawn Equipment, etc.) Order and keep inventory of all parts (some driving required) Use Company vehicle to deliver paperwork and parts between vendors and yards 50/50 Inside and Outside work
Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance
Qualifications: Maintenance experience 1 year preferred Must Have A Valid Texas Drivers License Must have a Clean Driving Record Pass a background Check Must be at least 21 years of age Must be able to lift up to 40 pounds and stand for long periods of time Must have basic Plumbing and Electrical Knowledge Must be able to operate Power tools (chainsaw, power drill, skill saw) Must have reliable transportation to and from work Bilingual (Spanish and English) is a plus but not required Weekends as needed

The Alabama-Coushatta Indian Tribal Council Employment & Training Program is a Tribal Program that was formed in 1973. The program was designed by the Department of Labor’s Division of Indian and Native American Programs (DINAP) and is managed by the Alabama-Coushatta Tribe of Texas.
Our program provides employment and training services to Native Americans/American Indians, Native Hawaiians, and Native Alaskans that reside within the 121 county service area of the State of Texas.
It is the mission of the Alabama-Coushatta Indian Tribal Council Employment & Training Program to provide quality educational and employment opportunities to our Native American/American Indian, Native Hawaiian, and Native Alaskan clients in our service delivery area by reaching out into communities and joining forces with business leaders, workforce boards, service providers, and educational institutions to ensure participants are well prepared to meet the opportunities of employment such that they may take advantage of progressive career opportunities.
You must be a member of a U.S. Federally recognized tribe with a supporting document from a federally recognized Tribe's Tribal Rolls and Records Office
Workforce Innovation and Opportunity Act Section 166, 20 CFR 684.300 (a) (1) An Indian, as determined by a policy of the INA program grantee; (2) Alaska Native; or (3) Native Hawaiian.
Our Services: EMPLOYMENT CAREER SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.
TRAINING SERVICES - Provide job readiness training as a means of better preparing Native Americans for the workforce.
EDUCATION SERVICES - A wide range of services to assist Native Americans as they seek job placement or advancement in their career.

The Harris County Flood Control District is seeking exceptional candidates for the position of Inspector with the Construction Division.
Responsible for observing, inspecting, and documenting work-in-progress on construction project sites to ensure the work is being performed in accordance with sealed and approved construction plans, sound construction practices, and all applicable local, state, and federal permitting and approvals. Inspections include site clearing observation, grading, excavation, backfilling, and/or installation of reinforced concrete structures such as box culverts, low flow sections, slope pavement, inlets, manholes, and street sections.
Essential Functions and Duties: Perform daily inspections of construction sites and work completed to ensure projects are constructed in accordance with the sealed and approved construction plans, follow good construction practices and standards, and are applicable to local, state, and federal permitting. Coordinate with contractor representatives on work scheduling, interpretation of plans and specifications, and acceptability of materials and workmanship to ensure compliance with sealed plan requirements. Inspect materials on construction sites to ensure compliance with technical specifications and drawings, and schedule independent material testing and engineering companies to assist with quality assurance. Report all reject materials and deficiencies in construction methods. Document, photograph, and maintain daily reports summarizing construction progress, scheduling, workmanship, and deficiencies of construction materials and methods. Collect and review supporting documentation for payment of work performed, consisting of delivery tickets, invoices, product labels, sketches, calculations, and other related records that identify approved materials and products used to support quantities for payment. Prepare for and communicate substantial completion and final walk-through of projects to address any questions or concerns and finalize completion punch list with assigned contractor. Perform other duties that may be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: Valid Class "C" Texas Driver License Knowledge of Microsoft Office applications. Good verbal & written communication skills. Ability to prioritize and manage multiple projects and/or assignments. Good organizational skills. Knowledge of construction standards, practices, and techniques. Knowledge of bayou, drainage area, and rights-of-way maintenance.
Preferred Experience and Education: Associate degree or higher in Construction Management or a related field from an accredited college or university. Previous inspection experience in interpreting drainage and flood control construction plans and inspecting construction installations.
This position is subject to a criminal history check. Only relevant convictions will be considered and, even when considered, may not automatically disqualify the candidate. Employment may be contingent on passing a drug screen and meeting other standards.
The Harris County Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The District has jurisdiction over the county's primary stormwater facilities, consisting of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks.
Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Equipment Operator.
Reporting to the Maintenance Construction Field Supervisor, the Equipment Operator is responsible for operating various pieces of small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair or perform maintenance to channels/bayous within Harris County.
Essential Functions and Duties: Perform manual work in preparing surfaces and mixing concrete for concrete pour. Operate small sized construction equipment, small engines, attachments, power tools and hand tools for channel and bayou maintenance. Maintain, clean, and prepare construction sites to eliminate possible hazards. Assist with the evacuation of other equipment that have become disabled. Remove debris and/or selective vegetation from channel rights of way and de-snag channel bottoms. Clear trees, rocks, and any other large obstacles from the County rights-of-way. Prune limbs for access of equipment. Flag traffic to ingress and egress job sites. Act as a spotter for drivers/operators. Stock and inventory County trucks, trailers and equipment with tools and materials. Wash County vehicles and equipment. Clean shop, fleet parking area, and laydown yard. Assist with constructing forms, placing rebar, pouring, finishing concrete structures, building, or repairing manholes and inlets, and installation of corrugated metal pipe outfalls. Install signs, gates, and bollards. Load and unload equipment and construction materials on/off trailers and rollback trucks. Inspect County equipment and vehicles for safety and compliance before operation. Drive and operate County vehicles and equipment. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)   Qualifications: High school diploma or G.E.D. equivalent One (1) year experience operating small sized equipment. One (1) year experience as a laborer. Valid Class "C" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Familiar with Microsoft Outlook.
Preferences: Knowledge of construction standards, practices, and techniques. (preferred) Knowledge of OSHA regulations (preferred) Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

Harris County Flood Control District is seeking qualified candidates for the role of Heavy Equipment Operator II.
Reporting to the Maintenance Construction Field Supervisor, the Heavy Equipment Operator II is responsible for operating various pieces of medium and small sized construction equipment, small engines, attachments, power tools and hand tools to construct, repair, and perform maintenance to channels and bayous within Harris County.
Essential Functions and Duties: Construct forms, place rebar, pour and finish concrete structures such as culverts, inlets, and manholes. Operates medium and small-sized construction equipment such as excavators, skid o steers, and other machinery for channel and bayou maintenance. Build and repair manholes, inlets, and stormwater infrastructure components. Install corrugated metal pipe outfalls, signage, gates, and bollards. Perform minor erosion control repairs and grading operations on open channels and drainage facilities. Perform sediment removal operations using excavators, including operations on slopes. Clear debris, trees, rocks, and other large obstacles from right-of-way and channel bottoms. Remove selective vegetation and perform de-snagging operations on channels. Flag traffic and act as a spotter for other equipment operators during the ingress and egress of work sites. Inspect County vehicles and equipment for safety. May perform other duties that can be added or changed as the course and scope of the job directs.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)
Qualifications: High school diploma or G.E.D. equivalent Three (3) years of experience operating small sized equipment. Two (2) years of experience operating medium sized equipment. One (1) year experience driving dump trucks and or rollbacks. Valid Class "B" Texas Driver’s License. Must have or obtain a Forklift certification within 90 days of employment.
Knowledge Skills, and Abilities: Good verbal & written communication skills. Can effectively communicate with coworkers and the public. Must be able to read and understand written instructions, maps, and be able to provide directions to District locations. Ability to work in an outdoor setting. Ability to work well with a team in a field environment. Can work independently with limited to no supervision. Knowledge of bayou and drainage area maintenance. Knowledge of construction standards, practices, and techniques. Knowledge of OSHA regulations. Familiar with Microsoft Office (Outlook, SharePoint, and Adobe Acrobat Professional).
Preferences: Bi-lingual skills in English/Spanish (preferred)
NOTE: Qualifying education, experience, knowledge, and skills must be documented on your job application. You may attach a resume to the application as supporting documentation but ONLY information stated on the application will be used for consideration. "See Resume" will not be accepted for qualifications.
The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.   Harris County is an Equal Opportunity Employer

The Quality Control Shop Floor Inspector will be responsible for inspecting welding quality and performing dimensional inspections on ASME code pressure vessels, ensuring all products meet strict industry and company standards. The ideal candidate will be efficient, detail-oriented, and have a thorough understanding of ASME code and welding techniques.
Key Responsibilities: Perform visual and dimensional inspections of welded and fabricated components, ensuring compliance with ASME code standards. Inspect welds for defects such as cracks, porosity, and misalignment, ensuring all welds meet quality specifications. Conduct dimensional checks of equipment, ensuring compliance with design specifications and blueprints. Record and report inspection results accurately, identifying non-conformities and recommending corrective actions when needed. Work closely with production teams to resolve quality issues and ensure consistent adherence to quality standards. Maintain up-to-date knowledge of ASME code requirements, welding techniques, and industry best practices. Participate in continuous improvement efforts to enhance quality control processes and procedures.
Schedule: 10 hour shift Monday to Friday Weekends as needed Expected hours: 50-60 per week
Benefits: Paid time off Overtime
Qualifications: High school diploma or equivalent required; relevant technical certifications preferred. Background in welding or fitting. Minimum of 3 years of experience in quality control, welding inspection, or a similar role in an ASME code fabrication environment. Strong knowledge of ASME code requirements and welding standards. Proficiency in reading and interpreting blueprints, technical drawings, and welding symbols. Experience with inspection tools and equipment such as micrometers, calipers, and other precision measuring instruments. Excellent attention to detail and problem-solving skills. Strong communication and teamwork skills.
Preferred Qualifications: Certification in welding inspection (e.g., AWS CWI) or quality control is highly desirable. Familiarity with Non-Destructive Testing (NDT) methods is a plus.

Maquinista Manual Resumen del rol: El maquinista manual tendr un amplio conocimiento sobre un fondo diverso que ejecuta varias mquinas manuales, incluidas, entre otras, fresadoras verticales y horizontales, tornos verticales y horizontales y rectificadoras. Esta persona tendr experiencia en la configuracin y marcacin de varias partes de su mquina. El maquinista QRC de la bomba ser responsable de fabricar piezas a partir de materia prima, as como de mecanizar piezas existentes a nuevas dimensiones o mecanizar piezas reparadas. El maquinista debe ser capaz de trabajar de forma independiente y con instrucciones limitadas, pero siguiendo hojas de ruta y / o dibujos de piezas. Podrn seleccionar insertos de herramientas adecuados, velocidades y alimentaciones segn sea necesario y lo requieran para cumplir con los requisitos de la pieza y el material que se est mecanizando. Responsabilidades: El maquinista manual es responsable de configurar y mecanizar piezas y componentes para todas las bombas y equipos de coquizacin en cualquier mquina en nuestro taller. Trabajar de forma segura y ayudar a los colegas a trabajar de forma segura. Seguir el resumen previo al trabajo y todas las listas de verificacin antes de mecanizar una pieza. Seguir todos los fresadores y procedimientos de mecanizado Piezas de mquinas que utilizan mandrinadoras horizontales manuales, tornos verticales, tornos de motor, molinos, rectificadoras y taladros. Capacidad para trabajar eficientemente dentro de ventanas de tiempo fijas para cada proceso de mecanizado. Capacidad para mantener tolerancias dentro de .0005", e inspeccionar piezas usando micrmetros, medidores, etc. Capacidad para leer impresiones / dibujos y ejecutar en funcin de los datos proporcionados Fabricar herramientas y hardware como parte de la mejora continua de la instalacin. Coordinar con ventas, operaciones, ingenieros y clientes segn sea necesario. Exhibir un comportamiento que fomente la formacin de equipos, la toma de decisiones, la resolucin de problemas y las mejoras continuas. Capacidad para mecanizar una variedad de metales como aceros inoxidables de las series 300 y 400, Inconel 625 y 718, acero al carbono, etc. Cumplir con todas las polticas y procedimientos de Flowserve; especficamente en torno al tiempo y la asistencia, la seguridad y la productividad Requisitos bsicos: Diploma de escuela secundaria o equivalente. 5 aos de experiencia en mecanizado manual, incluyendo HBM y/o VTL Debe tener un conjunto personal de herramientas, micrmetros, amoladoras manuales y caja de herramientas enrollable. Capaz de permanecer de pie durante largos perodos. Demostracin de atencin al detalle y al proceso. Habilidades de comunicacin verbal y escrita en ingls competente Excelentes habilidades de organizacin, capacidad para trabajar de forma independiente, capaz de resolver problemas y priorizar las asignaciones de trabajo. Debe poder trabajar horas extras, incluidos fines de semana y das festivos. Habilidades y destrezas preferidas: Conocimientos informticos, incluidas las aplicaciones de MS Office. Atencin demostrada al detalle y a los procesos Excelentes habilidades organizativas Capacidad para trabajar de forma independiente, resolver problemas y priorizar las asignaciones de trabajo con el apoyo del lder del equipo y el supervisor Debe ser capaz y estar dispuesto a trabajar horas extras, incluidos los fines de semana y das festivos, cuando lo dicten las emergencias del cliente y las necesidades comerciales. Conocimiento de las actividades del entorno de servicio, incluyendo DCI, mecanizado, montaje, prueba y servicio de campo para equipos rotativos. Capacidad para priorizar y gestionar mltiples tareas en un entorno de trabajo acelerado y cambiante Experiencia previa trabajando en el entorno acelerado e impredecible en torno a los servicios de reparacin. Fuerte impulso para hacer que las cosas sucedan y una fuerte actitud de "lo puedo hacer" Flowserve es un fabricante lder mundial y proveedor de servicios posventa de sistemas integrales de control de flujo. nete a una empresa cuya gente est comprometida con la construccin de un futuro ms sostenible para hacer del mundo un lugar mejor para todos. Con 16,000+ empleados en 50+ pases, combinamos nuestro alcance global con presencia local. Nuestro equipo se desafa a s mismo para abordar cada situacin con ingenio y creatividad para ayudar a brindar a nuestros clientes los productos y servicios de control de flujo ms innovadores. Apoyamos a 10,000+ clientes en todo el mundo, creando productos para satisfacer las necesidades de nuestros clientes que suministran energa, agua dulce, productos farmacuticos y otros elementos esenciales a consumidores, empresas y gobiernos a nivel mundial. Lo invitamos a poner en marcha sus talentos y su carrera en Flowserve. Req ID : R-13316

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The CNC Machinist will set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. Must have Horizontal boring machine experience (HBM) This will be a 2nd shift opportunity; Overtime may be required. Responsibilities: Operating CNC Machines, BMH, Manual Machines, CNC Lathe, VTL, HBMOperating Machine or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Requirements: Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC Machines, manual lathes, milling machines.HS Diploma / GED and 3-5 years relevant experienceExperience operating LARGE machinesHBM Machine, tooling for Line Boring Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits Req ID : R-14270 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

*********************$5,000 SIGN ON BONUS********************** Clean HarborsClute, TXis looking for aLead Diesel Mechanicto join their safety conscious team!The Lead Diesel Mechanics are responsible for overseeing the day-to-day operations of the shop, which include supervising all maintenance work, assuring company fleet is within DOT compliance, as well as maintaining all service and parts records. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesOpportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Performs preventative maintenance, conducts inspections, troubleshoots, diagnoses failures & deficiencies & performs necessary corrections. This includes conducting offsite road repairs/service calls.Completes daily checklist as required for proper operation of the unit being operated.Assures unit has daily maintenance duties performed and communicates any problems or issues with the unit immediately upon discoveryCompletes and submits all associated paperwork as required for tracking PM schedules.Conducts Safety Checks & Annual Vehicle Inspections in accordance with provincial & federal laws.Assures that Equipment is properly parked in compliance with facility permit and DOT requirements.Ensures that work meets all applicable Health and Safety Standard Operating Procedures.Responsible for maintaining a clean work environment.Performs other assignments as assigned by management.Understands Clean Compliance Standard. What does it take to work for Clean Harbors 5-7 years of diesel engine experienceAbility to work in team environment.Must be versed in all aspects e.g. electrical, computer, ECMs, fuel, air systems, ABS, hydraulic systems, engines etc.Demonstrates complete proficiency in diagnostic, repair, and maintenance of the following units: heavy duty forklift, roll off truck, forklifts, pick up trucks, box trucks, tractors, and tankers.Demonstrates complete proficiency in tooling and equipment diagnostic, repair, and maintenance.Ability to pass a background, drug, and physical test upon hire 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Job Purpose/Summary:Installs, repairs, and maintains diesel engines and HAZMAT tankers. General maintenance as required.Job ResponsibilitiesResponsible for maintenance and repairs on transport trucks, trailers and pickups.Participate in on-call rotation schedule.Ensure proper D.O.T., state inspection and insurance papers are included in the cab data book.May operate fork lift and company assigned pickup.Familiar with all safety procedures for working with electricity, engines, compressors and material safety data sheets for related materials.May work in proximity to significant hazards (H2S, chemicals, high voltage, elevated heights, volatile liquids, etc.), which require safety accommodations and/or procedures.Perform brake jobs, troubleshooting, electrical problems, and inspect equipment (turbo, engine, a/c, all electrical).Perform state truck and trailer inspections.Demonstrate ability to make independent decisions and reports work progress routinely.Proficient with paperwork, inspection compliance and records keeping.Work independently and able to initiate and manage outside repairs.Assist in scheduling trucks for maintenance and inspections.Assist in maintaining Safety Data Sheets.Work under indirect and occasional supervision.May occasionally lead and train other mechanics.Fill in for the lead mechanic when needed.Other duties and responsibilities as assigned by the supervisor.Demonstrate a positive impact by promoting safety in decisions and actions.Knowledge, Skills, and Experience Required:High school diploma or equivalent.Minimum of 3 years of experience.Intermediate mechanical aptitude and familiarity with diesel and gasoline engines, electronics and testing equipment.Basic math skills required to take measurements, change speedometers, read manuals and perform service work.Applicable safety training, licenses and certifications for the job assignment.Must have own tools (Tool Allowance provided).Must have and maintain a valid Class C operator driver’s license to operate company pickup trucks; CDL license is preferred.Successfully pass pre-employment background check (including MVR) and drug testing.#PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

Dover is a diversified global manufacturer with annual revenue of over $7 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.What You'll Do:Sets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following responsibilities:Read, process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirementsInterpret work instructionsIdentify, select and install proper tooling for operations being performedCalculate proper feeds and speeds for a variety of steel grades, copper, brass, aluminum and bronzeIntuitively understand capabilities of tooling and machineryUnderstand applicable quality systems and perform necessary quality inspectionsAdhere to all Waukesha Bearings policies and proceduresApply principles of Lean Manufacturing to reduced setup times and improve productivityActively participate in daily Continuous Improvement activitiesEmployee must be able to set up all necessary measuring equipment and routinely check the calibration of the equipment while measuring.What You'd Bring:Experience withMills Machines; ideally EC1600Experience using GibssCam software is strongly preferredPrior experience with precision inspection equipment including, but not limited to, micrometers, calipers, height gauges, bore gaugesProven ability to hold tight machining tolerances of less than .001”Education:One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.Mental/Visual/Physical Effort:The employee is regularly required to stand and talk or hearoccasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smellmust frequently lift and/or move up to 50 poundsSpecific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.Material Hazards:Regularly exposed to moving mechanical partsOccasionally exposed to fumes or airborneSets up and operates manual machines, including but not limited to mills and lathes, to perform machining operations by performing the following duties.#LI-KZ1#SWEWe consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.#LI-LM1

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Certified Automotive Technician position. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Certified Automotive Technician is the top of our maintenance team with a focus on diagnostic and repair. This role will work to keep all equipment in running condition through our effective preventative maintenance program, as well as taking on the responsibility of handling complex repairs such as engine and transmission overhauls. This position is a master technician and assumes a leadership role with product knowledge and a standard of quality. Wage: $24.50 hourly Schedule: M-F 8AM-5PM Apply today and shift your career into drive for tomorrow! Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel, Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferredTrade School PreferredASE Certified Professional Experience: At minimum three (3) years of vehicle maintenance experience Knowledge: Must be able to perform vehicle repairs without oversightAbility to repair vehicles independently, while also having experience working well in a team environmentExperience using shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Req ID:461245Address: 612 Pederson Rd Katy, TX, 77494Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with Residential and/or ducted products, air cooled and/or water-cooled chillers, AHU’s or Roof Top ducted units. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredMinimum of 5 years’ experience in Industrial setting.Be a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, trouble shooting and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Able to repair but not limited to centrifugal compressors, steam turbines, screw chillers system components.Opportunity to invest in career development. You will enroll in training programs and JCI’s STA to gain knowledge in HVAC products and sales quoting.You will work collaboratively with other local market mechanics.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

$23.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. HoustonTexasUnited States of America

Overview: CONSIDER MAKING A MOVE TO STERLING MCCALL COLLISION CENTER OF JERSEY VILLAGE!SIGN-ON BONUS FOR QUALITY CANDIDATES!WE ARE A QUALITY COLLISION CENTER WE REPAIR ALL MAKESSterling McCall Collision Center of Jersey Villageis part of the fast growing Group 1 Automotive, a leader in automotive retail. We are looking to add an additional COLLISION REPAIR/BODY & FRAME TECHNICIAN to our team. We are a high volume collision centerwith plenty of work, state of the art facility, with all the latest equipment to help you perform efficiently!In addition to competitive pay, we offer our associates the following benefits:Health, Dental, Vision, Life, and Disability insurance401(k) plan with company matchPaid Time-OffEmployee Stock Purchase PlanEmployee Vehicle Purchase ProgramProfessional work environment, with job training and advancement opportunitiesResponsibilities:Repairs vehicles per estimate and according to manufacturer standards.Notifies management of any additional repairs needed. Documents and additional parts and labor required to perform a satisfactory repair.Maintains and wears all required safety and health personal equipment, including respirator, in the manner recommended by the equipment manufacturer.Demonstrates behaviors consistent with the Company’s Values in all interactions with customers, co-workers and vendors.You need:2 PLUS Years’ experience as a collision repair technician with heavy structural collision and frame experience.ICAR or ASE certifications in auto body repair a plus.Company provides paid training.Working knowledge of all aspects of repairs for damaged vehicles including body work and when to replace or repair parts.Valid driver license in the state that you will work and a good driving record.Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com.Apply today or refer a qualified friend.*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*We are an Equal Employment Opportunity EmployerIND2

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager willensurethat all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Experience working with 50 + buses within the last year.Previous passenger transportation in current project or similar environment preferred.Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.Must have a CDL class B with passenger and airbrake endorsement.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.Field Service TechnicianJob Responsibilities:Troubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service van and its inventory.Process paperwork after completion of each job.Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Work Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

The Service and Parts Technical Advisor acts as a direct liaison between Stellantis, Chrysler, Jeep, Dodge, Ram, Alfa Romeo, and FIAT dealerships within the Central Business Center. The Technical Advisor's responsibility is to provide technical assistance and fixed operations consultation to our dealer service personnel, fleet, and commercial customers. The Technical Advisor will motivate and lead dealer service personnel to higher levels of service and parts performance consistent with corporate and industry direction. They will assist with resolutions on current unresolved issues in support of dealer's efforts to maximize their competitiveness in the marketplace while improving customer retention and loyalty. Job responsibilities include but not limited to: Provide phone and in-dealership technical assistanceTroubleshoot and solve final repair attempt situationsRepresent Stellantis as subject matter expert (litigation/buybacks); CAIR updates needed for each involvementManage dealership technical training requirementsProvide support for C.A.G. / engineering - providing on ground request supportRecall and Required Service Updates (RSU) follow-up and reductionAct as a quality feedback liaisonProvide dealership consultation on the following: repair service agreements and facilities inspectionsTools / equipment facility needsCustomer experience and improved fixed first visitRepair shop process improvements and proactive business planning with a focus on the customer

Waste Connections is looking to hire a 2nd Shift Diesel Mechanic to join our team in Alvin, Texas!Why Join Us • CULTURE: It’s a Great place to work! We work in an environment where empowered, self-directed all-stars know what they do is important.• INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees.• RESPECT: We show respect for our customers and fellow employees. Respect for ourselves grows through all the hard work and great service we provide to the communities we are privileged to serve.Click to view A Day in the Life of a Waste Connections Mechanic (youtube.com) of our Mechanics.Responsibilities:Repairs include but are not limited to, routine maintenance and repairing engines chassis and body components, hydraulic cylinders, brake systems, suspension systems, cooling systems, wheels and tires.Inspects equipment and/or trucks for condition, operations, parts and fluid levels, differentials, final drives, pump drives, and hubs.Knowledge of Hydraulics repair is requiredUtilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.Conducts safety checks on vehicles and equipment.Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports.Performs maintenance related work as required.Maintains a clean, safe work area in compliance with corporate and OSHA standards.Performs required safety protocols while working on vehicles.Ability to effectively communicate needed repairs or tasks.Extensive physical activity. Requires strenuous physical work; heavy lifting, pushing, or pulling required of objects over 50 pounds.Work environment may be indoors in a shop, or outdoors to repair trucks on the road. Usually well-lighted and ventilated. Sometimes necessary to work in awkward or tight positions and to handle greasy or dirty tools. These factors require following basic safety precautions.The ideal candidate will possess:Minimum of 2+ years’ experience, that is directly related to the duties and responsibilities specified above.Must provide own personal tools. Welding/fabrication experience is a huge plus!ASE Certifications Preferred, but not requiredWhat we offer to you:Yearly Safety Bonuses Yearly Boot allowances Competitive compensationPerformance-based career growth potentialMedical, dental, vision insurance plansIncome Protection Plans (Life Insurance, Short Term/Long Term Disability)401(k)Flexible Spending AccountEmployee Assistance Program (EAP)Emergency Travel AssistancePrepaid Legal PlanTo be considered for any of our current openings you must complete an application at www.wasteconnections.com . Application information and additional instructions can be found once you select your position of interest.We offer excellent benefits including: medical, dental, vision, flexible spending account, long term & short term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future".Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.

Job Summary In partnership with site leadership, responsible for delivering industry leading maintenance performance and asset utilization. Responsible for delivering excellence in cost, plant and vehicle availability, asset utilization, plant productivity management & performance improvements and maintenance compliance. Essential Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Maintenance Operations Performance Responsible for delivering maintenance performance that meets or exceeds the needs of the business.Responsible for developing and delivering high performance maintenance operations through implementation of WM standards, Technician training, best practice application, audit and compliance to WM and regulatory standards.Audits and reports performance at the Plant Leadership team and champions the creation of action plans to improve low performance.Ensures accuracy and compliance with WM maintenance and safety standards and regulatory requirements.Knowledge and understanding of the maintenance and operations of all plant equipment.Works with Plant management on cost studies for equipment and facilities to reduce operating costs. Utilization/Asset Management Performance Works in partnership with Engineering, Fleet and HE on effective acquisition of assets.Working relationship with equipment manufactures to deliver optimum equipment performance, maintenance and cost. Business Partner Responsible for acting as an Advisor to Plant Leadership in the planning of maintenance budgets, shop and equipment related capital projects, and Plant Management hiring and development.The Field Recycling Maintenance Manager is responsible for being a WM leader in cost, productivity management and improvement strategies, knowledge of the equipment and techniques that drive profitability. This focus will include all aspects of the recycling business touched by maintenance. Fleet Leader Responsible for review and advisement of assigned technology initiatives and process improvement projects to drive improved equipment performance or shop productivity. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience Experience: Bachelor’s Degree (accredited) in Plant/Military Maintenance Management or similar area of study or in lieu of degree, High School Diploma or GED (accredited) and four years of relevant work experience.Experience: Ten years of prior plant/military maintenance management experience and three years of prior work experience leading management employees. B. Certificates, Licenses, Registrations or Other Requirements None required. C. Other Knowledge, Skills or Abilities Required Plant maintenance management experience and supervisory/management skills requiredStrong interpersonal and relationship skills; organizational and political savvyAnalytical and Problem Solving skillsAbility to coach others to improved performanceStrong project management skills; working knowledge of group infrastructureExperience in leading/motivating large, diverse workforce; must be able to build camaraderie/trustOSHA TrainingElectrical, Hydraulic, PLC and fabrication knowledge and experience Work Environment Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Normal setting for this job is: office setting and/or landfill/outdoor. BenefitsAt WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click "Apply. As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status.

Line of Business: OtherPay Range: $82,830.00 – $110,469.99About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingDevelop and manage detailed maintenance schedules and work orders to ensure timely and efficient maintenance activities.Coordinate with maintenance technicians, engineering teams, and operations staff to schedule and prioritize tasks across multiple product lines.Implement preventive maintenance strategies to minimize equipment downtime and extend asset lifespan.Estimate time, resources, and costs for maintenance jobs, manage inventory, and work with vendors to procure necessary tools and parts.Ensure all maintenance activities comply with safety regulations and industry standards, while maintaining accurate records and running reports for management.What Are We Looking ForStrong analytical and problem-solving skills.Excellent communication and coordination abilities.Proficiency in maintenance planning software and tools, with a preference for previous experience using SAP.Ability to work independently and as part of a team.Commitment to safety and quality standards.Work EnvironmentFast-paced and dynamic work environment.Collaborative team culture.Opportunities for professional growth and development.What We OfferCompetitive base salary and participation in our annual incentive plan.401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Does this position interest you You should apply –even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work.Do you like to be challenged Have natural mechanical ability Work independently, but also as part of a team with opportunities for growth and advancement Join Safelite as an Auto Glass Technician Trainee the first step in becoming a certified auto glass technician on a nationally recognized team of expert installers! We’ll train you to install and repair auto glass, recalibrate car safety systems and provide service so great, it’s memorable. And you’ll get paid to learn it all!We’re more than just a glass company. We empower our associates with the support they need to be efficient, to problem-solve and have an eye for detail, and most importantly, to deliver quality service and bring a little unexpected happiness to people’s lives.This isn’t your typical desk job! You’ll be outdoors, working with your hands, and yes, that means working in an ever-changing environment with all sorts of weather conditions.It’s time to start that new career you’ve been thinking about. Invest in yourself and learn more about our 3-month paid training program. Once on the job, your pay is evaluated every six months to ensure you’re rewarded for outstanding performance!As a Technician Trainee you will: Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:Installing and repairing auto glassRecalibrating automotive safety systemsProviding additional services & productsStudy and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques.Safely operate a company vehicle and company-issued tools utilized throughout the workday.What you’ll get:Competitive weekly pay starting at $20/hour, increasing to $24.75/hour after training and certification.Earn $5/set of wiper blades when added for customer safety.Potential to be promoted in your first year! Earn up to $30.41/hour as a Senior Tech & up to $32.86/hour as a Master Tech. Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction.A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days.Program to buy additional PTO or sell unused time up to 16 hours.Up to $5,250 annually in tuition reimbursement.Paid training and all the tools and resources you'll need to be successful.View all our health, wealth, and life offerings at www.safelitebenefits.com.What you’ll need: (Not sure if you meet all the requirements We encourage you to apply!)Must be 18 years of age or olderValid state-issued driver’s license requiredComfortable working outside (in a wide variety of weather conditions) on your feet for extended periodsAbility to work scheduled days, with flexibility on start and end times to accommodate customer’s needsAbility to regularly lift up to 35 pounds and occasionally lift up to 50 poundsHigh school diploma/GED/equivalent preferred; ability to read & write--Internal Associates: Already a member of the Safelite team Apply through your Workday account by searching 'Find Open Jobs'.Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Safelite.com/Careers.Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment.This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws and regulations and with Safelite Group, Inc. policies and practices.--

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30-$50 per hour.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Entity: Supply, Trading & ShippingJob Family Group: Operations GroupJob Description: About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition.Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline.About the roleLocated in Houston, TX, Conifer Systems has been in business for over 15-years and is seeing unprecedented growth. We contribute our success to our long-term employees, and an environment that promotes teamwork, collaboration, and professional development.The Field Service Technician will be responsible for preforming, General I&E work and supporting the commissioning process of industrial combustion and environmental equipment, ensuring that all systems are installed, tested, and operational to client specifications.Key accountabilitiesInstallation Oversight:Perform the installation, testing, and assist the commissioning of industrial systems, including oxidizers, furnaces, flares, vapor recovery units, scrubbers, and associated controls.Ensure that all activities meet safety and operational standards, promoting a zero-accident work environment.Safety and Compliance:Adherence to safety protocols and ensure that all tasks are performed with safety as a top priority.Ensure compliance with company policies, procedures, and industry standards during department projects.Complete all necessary safety documentation and reviews, and support field teams in maintaining safety standards.Troubleshooting and Technical Support:Troubleshooting and repair of equipment during the commissioning phase, including combustion devices, burner systems, and control panels.Provide technical expertise in analyzing electrical schematics, control systems, and drawings to ensure accurate installation and setup.Work closely with team to resolve technical issues and optimize system performance.Work closely with our vendors to troubleshoot/install 3rd party equipment.Communication:Generate Service reports updating daily progression.Complete on-site checklist including. Loop checks, device test logs, preventive maintenance, and other record keeping documents.Ensure timely communication and updates with Line manager regarding project progress, material needs, and job status.Support aftermarket service operations, including troubleshooting and repair services for previously commissioned equipment.Essential experience• Minimum of 5 years of experience in field service, or similar roles, with a strong background in Burner Management Systems (BMS) and electrical instrumentation.• Proven experience in electrical troubleshooting/Debugging industrial control systems.• Strong troubleshooting skills in mechanical, electrical, and control systems.• Ability to read and interpret P&IDs, electrical schematics, and technical drawings.• Excellent communication skills both written and verbal.• Working Knowledge of PLC’s, HMI and SCADA/DCS• Ability to travel up to 75%, including international locations.Why join us Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today!How much do we pay $55,000-$79,000. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays.You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp.Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!Travel RequirementUp to 75% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround generalLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Overview: ** HIRING NOW **Seeking experienced Automotive Mechanics / Automotive TechniciansPay: $30.00 - $45.00 flag rateSun Auto Tire & Serviceoperates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning.The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Performs complex and heavy-duty repairs.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:Minimum of 5 years of automotive technician / mechanic experienceMust be able to demonstrate the ability to properly use computerized equipment for diagnostics.Possess valid/current driver’s licenseCurrent ASE’s preferredMust be at least 18 years oldAbility to work a minimum of five days, including SaturdaysWorking Conditions and Physical Demands:The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside.The Master Automotive Technician / Mechanic must be able to meet the following physical requirements:Stand five hours per day and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently.Hear and speakVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.This role will be considered for the O&M Tech level I, II, and III. Leveling will be based on candidates past work experience.Hourly Rate Range is from $35.22 - 56.96, depending on level. PRIMARY PURPOSE OF POSITIONThe primary responsibilities of this role will be to act asOperations Technician. They will operate and troubleshoot equipment and systems as required to support safe and reliable plant operations and maximize asset value.PRIMARY DUTIES AND ACCOUNTABILITIESOperates monitors and maintains turbines, generators, pumps, scrubber plants, industrial wastewater treatment plants, boilers, motors, combustion turbines and associated auxiliary equipment.Uses computerized maintenance management system to maintain and control work order system spare parts inventory.Leads equipment or system problem identification and recommends solutions.Perform predictive/preventive maintenance.Perform electrical maintenance on generators, transformers and MOV&rsquos.Perform troubleshooting on plant equipment such as power and control circuits, heaters, motors and transformers using electrical test instruments.Develops operating procedures for plant equipment to ensure consistent and safe operation.Performs all work during an assigned shift in a safe, continuous and efficient manner while maintaining environmental and housekeeping standards within federal, state and local guidelines. Performs work per Work Management processes and ensures safety using equipment Tag out process.Perform any other duties as assigned.POSITION SCOPEThe incumbent in this position must be able to communicate across all levels of the organization. The O & M Technician must have previously passed testing requirements and qualifications before performing this role. The O & M Technician electrical blocking knowledge must have continued to increase.Qualifications - ExternalMINIMUM QUALIFICATIONSAssociate's degree in Power Plant Technology, Engineering Technology, or Electronics ORHS Diploma with minimum of 18 months of trade or technical training in Power Plant TechnologySuccessfully complete the training requirements and time in job requirements for the position including previously passing the EEI TECH testElectrical backgroundAvailable for Rotation Schedule - Night/Day Shift Operations and Overtime as NeededGood oral and written communication skillsBasic computer skillsUnderstanding of power plant printsValid driver's license and access to an insured vehicleAbility to work in a power plant environment that includes climbing and walking long distancesAbility to lift a minimum of 50 pounds

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Machinist will operate a manual lathe and manual mill to machine stainless steel parts and components of flow control valves. The machinist will verify the quality of finished work with precision measurement tools. The Machinist will also operate a VTL. This is a second Shift position: Monday-Friday,4:00pm - 1:00amwith possible overtime during the week or weekend. Responsibilities & Requirements: Inspect first articles and verify the quality of the finished work by using precision measurement tools and demonstrating an in-depth understanding of specifications and quality workmanship.Meet production goals relating to efficiency, schedules, and scrap/rework.Clean and maintain machines and tools and keep an organized workspace.Apply an understanding of the process flow of documents, materials, and parts through the manufacturing process.Work closely with other machinists to discuss and solve problems relating to repairs and equipment.Collaborate with machine shop lead to discuss work-in-progress Preferred Experience / Skills: Experience operating manual lathes and mills (5+ years); Vertical Turning LatheExpertise required in machining 300-series stainless steel and other materials such as Hastelloy C276, Monel 400, Inconel, iron nickel and high chrome alloys.Working knowledge of machine tooling and processing requiredSkill required in using and interpreting precision measuring instruments.Strong blueprint reading skills requiredPersonal commitment to quality workmanship, with an ability to assess and explain quality concern to othersAble to accurately and consistently follow detailed procedures in order.An eye for detail to check drawings, part numbers, and materials, and to correctly complete routers and other paperwork.Work collaboratively as part of a team, showing a professional attitude and a service-oriented mindset in a fast-paced, flexible environment.Demonstrated track record of reliable, on-time attendance, able to work overtime and weekends as required.Standing for long times required, repetitive arm motions, frequent lifting of 25 lbs with occasional lifting up to 50 pounds.Must be able to complete math problems quickly and accurately.High School diploma or equivalent. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-13316 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment